Fleet Planner
Build out individual ship loadouts and organize them into fleet lists.
High Level Features
- Pick a ship chassis from a filterable list (Size, Purpose, Type, Race, Vendor, Build Method).
- Equip every slot: engines, thrusters, shields, weapons, turrets, software,
missiles/ammunition, drones, deployables, countermeasures, and crew.
- High Preset / Minimum Preset buttons auto-fill a loadout with
the most/least expensive option in each slot.
- Apply equipment and Mods through the
Modifications
Lab, including copy/paste between slots, a real material cost breakdown, and a Roll button.
- Import your own saved game loadouts (
loadouts.xml) or paste raw loadout XML
directly.
- Save a finished loadout, then filter/search your saved loadouts to load one back in later.
- Organize ships into any number of named, independently editable Fleet Lists.
- Download or upload a Fleet List as a file, or generate a share link.
Ship Builder
Pick a ship from the list on the left, then equip it slot by slot.
- The ship list is filtered by the checkboxes above it (Size, Purpose, Type, Race, Vendor, Build
Method).
- Once a ship is loaded, every real equipment slot it has shows up as its own section: engines,
thrusters, shields, weapons, turrets, software, missiles/ammunition, drones, deployables,
countermeasures, and crew. Only the sections a ship actually has appear.
- Each slot is a dropdown of every compatible option for that exact mount -- size and
compatibility tier are already filtered for you, so everything shown will fit.
- High Preset fills every slot with its most expensive option;
Minimum Preset fills only the required slots with the cheapest. Both work
ship-wide (next to "Select Loadout") or one section at a time.
- Chassis Mods and equipment mods are applied through the
Modifications
Lab button next to the chassis name or each equipped item -- see the Component Analyzer's own
Modifications Lab section below for the full rundown; it works the same way here.
- Add To Fleet List saves the current loadout into whichever fleet list is
active. Add To Saved Loadouts saves it to your own loadout library instead (see
Loadout Manager below) without adding it to a fleet.
Loadout Manager
Your own library of saved ship loadouts, separate from any one fleet list.
- Import Game Loadouts reads your real
loadouts.xml (either by
local file path, if you're running this app locally, or by uploading the file) and pulls in every
ship loadout it contains.
- Import Raw XML Loadout lets you paste a single
<loadout>
element (or a <loadouts> block with several) directly, for a loadout you don't
have the full file for.
- Once you have loadouts imported, Select Filter Loadout opens a picker with the
same chassis filters as the ship list above, plus free-text search by ship name or loadout name,
so you can find one saved loadout out of a large library quickly.
- Export Loadouts downloads everything you've imported/saved as one real
loadouts.xml, in the exact format the game itself uses. You can drop it straight
into Documents\Egosoft\X4\<id>\loadouts.xml and the game will load it. Station
module loadouts and any loadout this app couldn't parse are carried through untouched too, so
nothing from the original file is lost. Back up your real file first: this app
can't guarantee the result won't break something, and overwriting it can't be undone.
Clear Loadouts empties the library.
- A loadout you load back in from here populates the Ship Builder exactly as it was saved. Edit
it and re-save under a new name if you want a variant.
Fleet Lists
A fleet list is a named group of ships, built from the Ship Builder on the left.
- Create any number of fleet lists via the tabs at the top of this section; each one is
independently named, edited, and deleted.
- These fleet lists are used in the Cost Analyzer (and in the future, in the Fleet Trials of the
Proving Grounds) as the baseline to compare against. You can compare individual ship costs by
using fleet lists with only one ship in them.
- Every ship added to the active fleet list shows up as a row with an editable quantity
(ctrl-click a +/- to step by 10, shift-click to jump to max/0) and an optional note.
- Click a loadout's own expand/collapse arrow to show or hide its full equipment breakdown
inline, without leaving the list.
- Each fleet list has its own Build Method Priority -- an ordered list of which production
method to use first for every ware it needs, with each one below it as a fallback. This also
drives the Cost Analyzer's own cost figures for that fleet.
- Download a fleet list as a file, upload one back in, or use the Share button in the header to
generate a link someone else can open to load a copy of it (along with any other sections you
choose to include in that same link).
Cost Analyzer
Breaks down exactly what a Fleet List costs to build, down to the raw materials.
High Level Features
- Compare the cost of every Fleet List side by side, in one table.
- Switch between a Total Cost Breakdown and a Component Type Cost Breakdown.
- See Market Purchase Price, Production Wares Price, and Raw Materials Price, each as
Min/Average/Max.
- Drill into exactly which wares a build needs and how much of each.
- Override any ware's price to see how that changes every cost figure that depends on it.
- Select any Fleet List to focus the comparison on it, with colored value/percent diffs against
every other one.
Component Type VS Total Cost Breakdowns
Both tabs show the exact same underlying cost data for every fleet list, just organized differently.
- Total Cost Breakdown rolls every ship in a fleet together into one set of
numbers.
- Component Type Cost Breakdown splits that same total out by component type
(Engines, Shields, Weapons, and so on), so you can see which category of equipment is actually
driving the cost.
- Switching tabs doesn't recalculate anything -- both are ready as soon as a fleet list's cost
has been computed once.
Credits, Production Wares, Raw Materials Breakdowns
Three different "how deep do you want to dig" views into the same build, each collapsible.
- Credit Cost is the cost in credits. Market Purchase Price (buy from a
shipyard), Production Wares Price (buy the wares the shipyard consumes), and Raw Materials Price
(buy the raw resources), each shown as Min/Average/Max.
- Production Wares lists exactly which intermediate wares (hull parts, energy
cells, and so on) a build needs and how much of each, one level down from the finished ship.
- Raw Materials goes all the way down to the base resources (ore, silicon, ice,
and so on) needed to produce everything above, recursively expanded through every recipe in
between.
- Expand or collapse any section's header to show or hide its own rows -- useful once a
breakdown gets long.
Fleet Comparison and Focus
Every fleet list you've built shows up as its own column, side by side, in every breakdown above.
- Select a fleet list to focus it as the baseline to compare other fleets' costs against -- the
whole column highlights, and every other column then shows both its own value and a colored
(green for more, red for less) raw and percent difference against that baseline.
- Select it again to remove the comparison focus, back to plain values with no comparison.
Select a different fleet list to switch the baseline to it instead.
- This selection is its own thing, separate from which fleet list is "active" in the Fleet
Planner (the one the Ship Builder is currently adding to) -- selecting a fleet list here never
changes that.
Ware Price Overrides
Override what this app assumes a ware costs, for every cost calculation that uses it.
- Click Set Ware Price Overrides to open a list of every ware in the database,
with its real Min/Average/Max price and an editable box to type your own.
- Any override you set applies everywhere that ware's price is used. Every fleet list's cost
breakdown recalculates to match.
- Once you close the popup, a compact list of every currently active override stays visible so
you can see (and clear) them without reopening it.
Component Analyzer
Build side-by-side comparison tables for any equipment category or ware in the game.
High Level Features
- Compare any of the 12 component types: ship chassis, engines, shields, weapons, turrets,
thrusters, missiles, software, drones, deployables, countermeasures, and economy wares.
- Build any number of independent tables at once, each with its own component picker and
filters.
- Pick exactly which stats show as columns, grouped and searchable.
- Load ready-made comparison tables for common categories with one click (Load Prebuilt
Tables).
- Use the Statistics Lab to inspect stats by their source -- fundamental data points, or
derived from fundamental data.
- Author your own custom stats in the Statistics Lab -- formulas built from existing stats, with
mocked inputs for data a table wouldn't otherwise have access to.
- Inspect the formula behind any
Pre-Derived
or Derived
stat.
- Export tables to JSON, CSV, or XLSX, or import one back in.
Load Prebuilt Tables
The fastest way to get a useful table on screen without building one yourself.
- Click Load Prebuilt Tables and pick a category to load a ready-made, fully
configured comparison table for it -- every relevant component already added, with a sensible
set of stats already selected.
- This adds a new table alongside whatever you already have open; it never replaces or removes
an existing one.
- Loading the same prebuilt table more than once is fine -- each load is its own independent
table, so you end up with duplicates you can then edit differently or remove when you're done
with them.
Component Tables
A table is one side-by-side comparison -- you can have as many open at once as you want.
- Every table has an editable title and tab titles. The tabs are for switching between
different saved sets of columns on the same components selected for this table (more on that
under Statistics Lab/stat sets below).
- Each table picks one component type to compare (Ship Chassis, Engines, Shields, Weapons,
Turrets, Thrusters, Missiles, Software, Drones, Deployables, Countermeasures, or Economy Wares),
set once through a drop down.
- Add components to a table through its own picker, which has the same filters as everywhere
else in the app, narrowed to that component type.
- Which stats show as columns is chosen separately per tab (see "Select Stats" on each tab), but
the components themselves are shared across every tab of the same table, so switching tabs just
changes which numbers you're looking at for the same row set, not the rows themselves.
Statistics Lab
The Statistics Lab is a manager for the statistics shown on the website, in the Component
Analyzer and the Proving Grounds. Every stat shown anywhere in this app can be found in the
Statistics Lab. It allows you to view available stats within and shared between component types,
when those stats depend on multiple component types. It allows you to view the source of the stat
and an associated formula referencing other stats, if there is one. It also allows you to create
your own custom stats. Below are the tags associated with different stats and what they mean.
- Fundamental
-- read straight from the game's own data files defining components, nothing computed.
- Pre-Derived
-- a formula this app ships with, determined by research, investigation, and modeling. Examples
include weapon DPS, shield totals, and so on.
- Derived
-- a formula you build yourself, defined using the stat builder with a JavaScript math
expression.
- Mod --
dynamic stats whose values change based on inputs from the Modifications Lab. These stats are
used to determine Post Mod pre-derived stats, which apply the modifier to the fundamental
stats.
- Production
-- production cost stats. These are separated from the fundamental stats because of how they're
generated by the data backend: dynamically, from the game's own production costs, whenever a new
ware build method is parsed -- so a game mod adding new ships, production methods, or wares
gets new Production stats automatically.
- Click Details next to any stat (fundamental excluded, since there's nothing
to show) to see exactly what it's made of -- its formula and where every variable in it comes
from -- without any risk of changing it.
- Click Clone to start a new stat from an existing one's formula, or
+ New Stat to build one from scratch: write a formula using math (sums,
averages, comparisons) over any other stat, on this component type or pulled in from a different
one.
- The Constants page holds reusable numbers (like the ones this app's own
built-in combat-math stats are curve-fit against) that a formula can reference the same way it
references a stat.
- A stat you create is immediately usable from every table of the same component type, not just
the one you built it from.
- The same stat is displayed on multiple components, based on which component sources are
present in the formula for that stat. You can choose which group it appears under for each
component.
Mocked Components and Stats
Some formulas need an input from other component types besides the main component type for that
table. These stats can be resolved through the Mocked Stats and Components manager.
- A mock can be a plain number you type in, or a real component (e.g. "assume this engine is
installed on a Rattlesnake") whose own real stats get pulled in automatically.
- Stats which require some mocks but have no source for them will display a warning symbol
(⚠) in their stat value, which
explains the missing stats on mouse over.
- Mocks are configured at one of several scopes, and applied in order from most specific to
least specific: one row on one tab > one row across every tab > every row on one tab >
all rows and tabs of a table > or a global mock. The most specific scope with something
configured always wins.
- Multiple mocks can be configured on a single scope. They're applied in order until all
required stats are filled from compatible equipment. Incompatible components are skipped by the
mock. All used mocks and skipped mocks are listed by an info pop-up next to each stat value in
the table.
- Click Mocked Stats on a table to see every mock currently affecting it, and
which rows (if any) are still missing one they need -- a cell missing a mock it needs shows a
small ⚠ warning icon you can hover for
details.
- "Group mode" lets a mock spread itself across a chassis's own real hardpoint groups instead of
being treated as one flat count. This is used by stats that need to know about per-group
totals, like average shield MJ per bonus-shield group.
Modifications Lab
Apply the game's own equipment mods to a component in this table, to see their effect on every stat
that depends on them.
- Click the
Mod
Lab button on a component's own row (or the table-wide one, to set a default for every row at
once) to open the picker.
- Pick a mod, then roll its value within its real in-game range -- the Roll
button does this for you and keeps a running total of the material cost spent rolling so
far.
- Every mod's own real material cost (wares plus credits) is shown before you commit to it.
- Copy a mod from one slot and paste it into another instead of configuring the same roll
twice.
- A cell affected by an applied mod is colored by that mod's own quality tier (
Basic,
Enhanced,
Exceptional
), so you can see at a glance which numbers in a table reflect a modded value.
- Mods can also be applied to mocks, and their changed values will also show on the stats
table.
Import and Export
- Export one or more tables to JSON (to re-import later), CSV (one file per tab, zipped), or
XLSX (one workbook per table, one sheet per tab) -- pick which tables to include when you
export.
- Import a previously exported file to bring those tables back, exactly as they were.
Proving Grounds
Compare real ships and fleets head-to-head on performance, not just cost.
High Level Features
- Add ships straight from your saved loadouts, from a Fleet List, or build one fresh.
- Edit a ship already in a comparison without removing and re-adding it.
- Pick any ship as a comparison baseline for colored value/percent diffs against every other
one.
- Switch between stat sets to compare different groups of stats without rebuilding the table.
- Build custom stat sets using the same stats built in the Component Analyzer.
- Fleet-level (whole-fleet) comparisons are planned but not built yet.
Ship Trials vs Fleet Trials
- Ship Trials compares individual ships against each other, stat by stat --
this is the finished half of Proving Grounds, covered by everything below.
- Fleet Trials (whole-fleet aggregate comparisons) is still under construction
and not usable yet -- its tab exists but just shows a placeholder for now. This should show
fleet-wide stats like burst and sustained DPS, as well as stat breakdowns along other groups,
like ship size or ship type. It should use aggregators across existing stats.
Adding Trials
A Trial is one side-by-side ship comparison, the Proving Grounds equivalent of a Component Analyzer
table.
- Click + Add Trial to create a new one; give it its own title by clicking the
title field.
- Add any number of Trials, each completely independent of the others.
- Minimize a Trial to collapse it out of the way without losing it, or remove it entirely with
the "x" button.
Define Stats in Stats Tabs
Which stats show as rows is controlled the same way a Component Analyzer table's columns are --
through stat-set tabs, stacked down the left side of a Trial instead of across the top.
- A brand-new Trial starts with 7 stat sets already filled in -- Core Stats, Basic Flight,
Advanced Flight, Shields, Weapons, Turrets, and Storage and Support -- the same layout as the
"Load Prebuilt Tables" band's own Large Ship Chassis table, so there's something useful to look
at immediately, with nothing to configure first.
- Click Select Stats on any stat set to change what it shows, or
+ to add another stat set tab entirely (e.g. one for combat stats, another for
economy stats) and switch between them.
- Every stat available in the Component Analyzer's own Ship Chassis catalog --
Fundamental,
Pre-Derived,
and anything you've built yourself in the Statistics Lab -- can be added to a Trial's own stat
sets the same way.
Add Ships to Trials
Three ways to add a ship to a Trial, each from its own button.
- Add Loadout Ship picks from your saved loadout library (Loadout Manager),
with the same filters and search as everywhere else that list shows up.
- Add Fleet List Ship picks one of your fleet lists, then one specific ship
from it -- read-only, it never changes the fleet list itself.
- Add Builder Ship opens a blank Ship Builder right inside the Trial, for
building a ship from scratch without needing to add it to a fleet list first.
- Once a ship is in a Trial, click Edit on its column to open the same Ship
Builder and change its loadout in place -- a Edited
badge appears once it's been changed from how it was originally added, so you can tell at a
glance which columns have drifted.
Comparison Baseline
Click a ship's own column header to set it as the baseline every other column is compared against.
- Every other column then shows a colored (green for more, red for less) raw and percent
difference against the baseline column, for every numeric stat in the Trial.
- Click the same column's header again to clear the baseline back to plain values; click a
different column's header to switch the baseline to it instead.
- The baseline column keeps its own place in the table -- setting or clearing one never
reorders the columns.